DT30
Number of channels: 4 channels
Power: 1400W*4/8Ω; 1600W*4/4Ω
Size: W:483(19"); D:423; H:88 mm (2U)
Weight: 11KG
Protection functions: direct current (DC) protection, short circuit protection, current limiting voltage protection, temperature limiting protection
Audio performance:
Total harmonic distortion (1kHz and below 1dB<0.1%)
THD+N (full power<0.8%)
Signal to noise ratio>102dBA
Signal channel separation (crosstalk @ 1KHz)<-70dB
Frequency response (1W8 Ω): 20Hz-20kHz+-1dB
Amplifier gain: 32dB
DSP:
Analog to digital conversion: 96 kHz/40 bit floating-point and asynchronous high-resolution sampling rate converter
Digital/Analog Converter: 40 bit 96 kHz; Maximum dynamic range of 21dB input
Internal precision: 32-bit floating point
Delay: Maximum 200 milliseconds
Equalizer: raised cosine, custom FIR (finite impulse response), parameter IIR (infinite impulse response): peak, high/low shelf type, all pass, bandpass, band stop, high/low-pass equalization
Frequency Dividers: Linear Phase (FIR), Hybrid (FIR-IIR), Butterworth, Linkwitz Riley, Bessel: 6 dB/oct to 48 dB/oct (IIR)
Limiter: voltage effective value, current effective value, peak limiter, compressor
Rear panel interface:
Number of simulation channels: 4XLR (female) LINK -4 XLR (male)
AES3-2 XLR multiplexing, (NEURIK terminal)
Output connector: Speakon Neutrik (4 x nlt4) (NEUTIK terminal)
Power connector: POWE CON (NEUTIK terminal)
Cooling: Front and rear airflow, temperature controlled speed,
Nominal voltage: 100-250VAC 50-60 Hz
Working voltage: 100-130V 190-250V AC
Power characteristics: soft start/power supply
Chassis appearance structure: black painted steel chassis/aluminum front
DT50
Number of channels: 4 channels
Power: 1600W*4/8Ω; 3200W*4/4Ω
Size: W:483(19"); D:450; H:88 mm (2U)
Weight: 16KG
Protection functions: direct current (DC) protection, short circuit protection, current limiting voltage protection, temperature limiting protection
Audio performance:
Total harmonic distortion (1kHz and below 1dB<0.1%)
THD+N (full power<0.8%)
Signal to noise ratio>102dBA
Signal channel separation (crosstalk @ 1KHz)<-70dB
Frequency response (1W8 Ω): 20Hz-20kHz+-1dB
Amplifier gain: 32dB
DSP:
Analog to digital conversion: 96 kHz/40 bit floating-point and asynchronous high-resolution sampling rate converter
Digital/Analog Converter: 40 bit 96 kHz; Maximum dynamic range of 21dB input
Internal precision: 32-bit floating point
Delay: Maximum 200 milliseconds
Equalizer: raised cosine, custom FIR (finite impulse response), parameter IIR (infinite impulse response): peak, high/low shelf type, all pass, bandpass, band stop, high/low-pass equalization
Frequency Dividers: Linear Phase (FIR), Hybrid (FIR-IIR), Butterworth, Linkwitz Riley, Bessel: 6 dB/oct to 48 dB/oct (IIR)
Limiter: voltage effective value, current effective value, peak limiter, compressor
Rear panel interface:
Number of simulation channels: 4XLR (female) LINK -4 XLR (male)
AES3-2 XLR multiplexing, (NEURIK terminal)
Output connector: Speakon Neutrik (4 x nlt4) (NEUTIK terminal)
Power connector: POWE CON (NEUTIK terminal)
Cooling: Front and rear airflow, temperature controlled speed,
Nominal voltage: 100-250VAC 50-60 Hz
Working voltage: 100-130V 190-250V AC
Power characteristics: soft start/power supply
Chassis appearance structure: black painted steel chassis/aluminum front
DT70
Number of channels: 4 channels
Power: 2000W*4/8Ω; 4000W*4/4Ω
Size: W:483(19"); D:495; H:88 mm (2U)
Weight: 19KG
Protection functions: direct current (DC) protection, short circuit protection, current limiting voltage protection, temperature limiting protection
Audio performance:
Total harmonic distortion (1kHz and below 1dB<0.1%)
THD+N (full power<0.8%)
Signal to noise ratio>102dBA
Signal channel separation (crosstalk @ 1KHz)<-70dB
Frequency response (1W8 Ω): 20Hz-20kHz+-1dB
Amplifier gain: 32dB
DSP:
Analog to digital conversion: 96 kHz/40 bit floating-point and asynchronous high-resolution sampling rate converter
Digital/Analog Converter: 40 bit 96 kHz; Maximum dynamic range of 21dB input
Internal precision: 32-bit floating point
Delay: Maximum 200 milliseconds
Equalizer: raised cosine, custom FIR (finite impulse response), parameter IIR (infinite impulse response): peak, high/low shelf type, all pass, bandpass, band stop, high/low-pass equalization
Frequency Dividers: Linear Phase (FIR), Hybrid (FIR-IIR), Butterworth, Linkwitz Riley, Bessel: 6 dB/oct to 48 dB/oct (IIR)
Limiter: voltage effective value, current effective value, peak limiter, compressor
Rear panel interface:
Number of simulation channels: 4XLR (female) LINK -4 XLR (male)
AES3-2 XLR multiplexing, (NEURIK terminal)
Output connector: Speakon Neutrik (4 x nlt4) (NEUTIK terminal)
Power connector: POWE CON (NEUTIK terminal)
Cooling: Front and rear airflow, temperature controlled speed,
Nominal voltage: 100-250VAC 50-60 Hz
Working voltage: 100-130V 190-250V AC
Power characteristics: soft start/power supply
Chassis appearance structure: black painted steel chassis/aluminum front